Futaba 18MZA WC 18-Channel Air Computer Radio System

Specifications

FEATURES

Internal hardware updated to be compatible with T-FHSS protocol and
all Futaba T-FHSS receivers
Bi-directional, full support for telemetry functions
Internal memory that can be used for sound and picture files
Built-in 0.3M megapixel camera
Dual high-speed processors
640x240 resolution 6" touch screen responds to gentle finger pressure
for easy navigation and programming
Built-in USB Port to connect a memory stick or connect transmitter
to a keyboard or mouse or download telemetry data to a PC or
laptop for storage and reference
Built-in Serial Interface for programming the travel, endpoint and
other functions of S.Bus and S.Bus2 servos
SD card slot allows even more (and adjustable) capacity for updates
model memory and more
R7008SB receiver allows the use of as many or as few channels as
needed-operate up to 8 channels using the standard PWM inputs and
any servos .Bus and S.Bus2 servos,
or use up to 18 channels (16 proportional, 2 digital) through the
two S.Bus2 ports, simple, foolproof setup for S.Bus and S.Bus2
servos
Adjustable stick angle allows users to customize their control setups
for greater ease and precision
Jack on rear of transmitter for charging transmitter battery

INCLUDES

Futaba 18MZA WC 2.4GHz Computer Radio System on Mode 2 with R7008SB
Receiver, 7.4V 3500mAh LiPo Transmitter Battery, Transmitter Case
Memory Card Slot, Tool Kit, Neck Strap

REQUIREMENTS

Servos of modeler's choice

SPECIFICATIONS

Weight: 1202 grams (2.65 lb.)
Operating System: 2-stick, 18 channels, 2.4GHz
Transmitting Frequency: 2.4GHz
Power Supply: 7.4V LT2F3500 LiPo battery
Current Drain: 1 ampere maximum (RF power on and back light on)
700mA average

COMMENTS

Optional multiple telemetry sensors are available; RPM (magnetic and
optical) Temperature, Voltage, Altitude, GPS and Fuel Level
jxs 03/28/16
ir/jxs

8 flight conditions.
15 factory-programmed mixes:
- Flap setting menu
- Differential ailerons
- Aileron to camber flap mixing
- Aileron to brake flap mixing
- Aileron to rudder mixing
- Airbrake to elevon mixing
- Rudder to ailevator mixing
- Rudder to elevator mixing
- Camber mixing
- Elevator to camber mixing
- Camber flap to elevator mixing
- Snap roll mixing
- Airbrake mixing
- V-tail mixing
- Motor mixing
- Fuel mixture
- Multi-engine mixing
- Gyro mixing

10 programmable mixes.
13 wing types:

1. Standard

a. 1 aileron
b. 2 aileron
c. 2 aileron + flap
d. 2 aileron + 2 flap
e. 2 aileron + 4 flap
f. 4 aileron + 2 flap
g. 4 aileron + 4 flap

2. Flying Wing

a. 2 aileron
b. 2 aileron + flap
c. 2 aileron + 2 flap
d. 2 aileron + 4 flap
e. 4 aileron + 2 flap
f. 4 aileron + 4 flap

3 tail types (normal; V-tail; ailevator).
Throttle cut and idle down.

8 flight conditions.
12 factory-programmed mixes:
- Flap setting menu
- Differential ailerons
- Aileron to rudder mixing
- Rudder to aileron mixing
- Airbrake to elevator mixing
- Camber mixing
- Elevator to camber mixing
- Camber flap to elevator mixing
- Butterfly mixing
- Trim mix 1 & 2
- V-tail mixing
- Motor mixing
10 programmable mixes.
3 tail types (normal; V-tail; ailevator).