Origin Acro Vectored Thrust 4S EPO Receiver-Ready 44"

Your position: Home > Airplane > By Completion Level > Bind-N-Fly

Description

Specifications

This is the Brushless Electric Powered, Radio Controlled
Almost Ready to Fly ACRO Vectored Glider from Origin Hobby.
This is an aerobatic glider with a vectored motor.
Flies as a normal glider, or at high speed with the included motor.
Under the control of an experienced pilot it will perform
aerobatic maneuvers such as flat spin, rolling, edge flight, hanging
vertical landing and more.

FEATURES

Construction: EPO Foam
Wing: One-piece
Aileron Control: Dual servo
Motor: 2836 (2450Kv) brushless
Electronic Speed Control: 40A with T-plug battery connector
Spinner: Plastic, black in color 1.5" (38mm) diameter
Canopy: Molded plastic construction, translucent matte finish
Servos: Five (four 0.32oz (9g), one 0.67oz (19g)
Propeller: Two each, 5x5 and 6x5 black plastic

INCLUDES

ARF ACRO Vectored Glider, two Props, Prop Adapter, Spinner, CG
Adjustment Block, Instruction Manual

REQUIREMENTS

Radio: 6-channel
LiPo Battery: 14.8V at least 2300mAh (if using 5x5 prop)
11.1V at least 2300mAH (if using 6x5 prop)
LiPo Battery Charger: Compatible with selected battery
Adjustable W/rench and Phliips Screwdriver
Field and maintenance equipment

SPECIFICATIONS

Wingspan: 44" (1120mm)
Length: 37" (940mm)
Wing Area: 255 sq in (16.5 sq dm)
Flying Weight: 31.7 - 35.3oz (900 - 1000g)
Center of Gravity: 2.7" (70mm) behind the leading edge of the wing at
fuselage sides
Control Throws: Normal Aerobatic
Elevator, Up/Down: 0.39" (10mm) 0.59" (15mm)
Rudder, Left/Right: 0.47" (12mm) 0.98" (25mm)
Aileron, Up Down: 0.39" (10mm) 0.59" (15mm)