- Description
Sig EDGEtra 3D Hy-brid Aircraft.
Blends the fuselage of the EDGE with the wings of an Extra
FEATURES
|
Construction: Balsa and ply CAD drawn, laser cut, and factory jig
assembled
Wing: Two-piece with aluminum joiner tube and removable side force
generators that add stability to knife-edge and 3D flight
Aileron Control: Surface mount dual servo configuration
Hatch/Canopy: Attaches to fuselage with magnets, clear plastic
canopy, painted pilot figure
Cowl: Painted fiberglass
Landing Gear: Main, carbon fiber, 2.5" (63.5mm) diameter main wheels,
steerable aluminum tail gear with 1" (25.4mm) diameter tail wheel
Wheel Pants: Painted fiberglass
Covering: High quality self-adhesive
Spinner: 2-3/4" (70mm) white plastic
INCLUDES
|
Precovered Fuselage, Wing and Tail Sections, Landing Gear, Wing Tube,
Pilot Figure, Spinner and Instruction Manual
REQUIREMENTS
|
Radio: 4-channel
Servos: Four high-torque mini
6" (152mm) Extensions: Two for aileron servos
18" (457mm) Extension: One for elevator servo
Y Harness: One for aileron servos
Brushless Motor: 600-1200W (550-800Kv)
Electronic Speed Control: To match selected motor
Battery: 4S 4000 - 5000mAh LiPo
Battery Charger: Compatible with selected battery
Propeller: Compatible with motor
Building and field equipment
SPECIFICATIONS
|
Wingspan: 60" (1524mm)
Wing Area: 675 sq in (43.5 sq dm)
Wing Loading: 18.8-20.5 oz/sq ft (56.4 - 61.5 g/sq dm
Length: 60" (1524mm)
Flying Weight: 5.5-6lbs (2495-2722g)
Center of Gravity (CG): 4.25" (108mm) back from the leading edge of
the wing at the fuselage
Control Throws; Low Rate High Rate 3D
Ailerons, up & down: 1" (25.4mm) 2" (51mm) max travel
Elevator, up & down: 1" (25.4mm) 2" (51mm) max travel
Rudder, left & right: 1-1/2" 2-1/2" (63.5mm) max travel