Construction: Injection molded EPO (expanded polyolefin) foam,
easily repairable with CA, white glue, or canopy glue
Wing: One-piece, attaches to fuselage with nylon bolt
Aileron Control: Dual servo
Motor: 1000kV outrunner
Landing Gear: Prebent wire with 2.5" (64mm) diameter wheels
Servos: Four mini
ESC: SuperTigre 30A brushless
Propeller: SlowFly 9x4.5
Cowl: Painted EPO foam with plastic radial engine detail
Warranty: Tower Hobbies guarantees this airplane to be free of
defects in material and workmanship at the date of purchase.
This warranty does not cover any component parts damaged by use or
modification.

Tower Hobbies RxR (Receiver Ready) F4U Corsair with Motor, ESC,
Servos, Propeller, Landing Gear and Instructions

Transmitter and Receiver: 4-channel radio and receiver
Battery: Flyzone 3S 11.1V 1800mAh LiPo, FLZA6024
Battery Charger: Duratrax Onyx 235 (DTXP4235) recommended
Charge Lead: SuperTigre LiPo to Banana Plug Charge Lead Adapter
(SUPM0070) if using Onyx charger listed above
Phillips screwdriver and scissors or hobby knife

Length: 31" (785mm)
Wingspan: 39" (990mm)
Wing Area: 271 sq in (17.5 sq dm)
Wing Loading: 14.9 - 15.9 oz/sq ft (45 - 49 g/sq dm)
Weight: 28 - 30 oz (795 - 850 g)
Center of Gravity (CG): 2-1/2" (64mm) back from the leading edge of
the wing at the fuselage side to start, Forward Limit: 2-1/4"
(57mm), Aft Limit: 2-3/4" (70mm)
Control Throws- Low Rate High Rate
Elevator: 1/4" (6mm) 9° 3/8" (10mm) 12°
Rudder: 3/4" (19mm) 13° 1" (25mm) 21°
Ailerons: 1/4" (6mm) 9° 3/8" (10mm) 14°