Construction: Balsa and ply
Wings: Fully-symmetrical airfoil, mid wing configuration two-piece
Aileron Control: Dual servo
Cowl: Fiberglass
Covering: Factory applied heat shrink covering
Radio Compartment: Easily accessible, plywood reinforced
Canopy: Single, clear
Landing Gear: 0.196" (5mm) diameter pre-bent steel wire
with 3" (76mm) diameter main and nose wheels
Building Time: Ready to fly in only 10-12 hours
Fuel Tank: 14oz (420cc) approximate, 5.3 x 2.7 x 2.2"
(135 x 70 x 57mm)
Spinner: 2-3/4" (70mm) diameter white plastic
Motor Mount: Unassembled plywood
Engine Mount: Two-piece composite construction
Warranty Period: Tower Hobbies guarantees this kit to be free from
defects in both material and workmanship at the date of purchase.
This warranty does not cover any component parts damaged by use or
modification.

Tower Hobbies ARF Kaos 60 Aerobatic Kit with prebuilt and covered
wings, fuselage and tail assemblies, pushrods, pre-bent landing
gear, three 3" (76mm) wheels, engine mount, motor mount, wing
bolts, fuel tank, spinner, wood servo trays and aluminum wing
joiners, hardware package and photo-illustrated instructions

Radio: At least 4-channel, computer radio with mixing capabilities
recommended
Servos: Mini high-speed digital, four if using electric power, five
for glow power
Receiver Battery: 2S LiFe, at least 1100mAH

Electric Power;
Brushless Motor: Rimfire 80 50-55-500Kv recommended
ESC: 75A
LiPo Battery: Two 3S, at least 3800mAh with series connector OR
one 6S at least 3800mAh
Battery Charger: To match selected battery
LiPo Charging Bag
Propeller to match brushless motor
Misc. Items: building and field equipment

Glow Power;
Engine: .60 2-stroke, or .91 4-stroke
Propeller to match selected engine
Throttle servo
Fuel, glow starter, engine starter

Wingspan: 62" (1675mm)
Length: 57.5" (1460mm)
Wing Area: 748 sq in (48.2 sq dm)
Weight: 7 - 8.25 lb (3170 - 3740g)
Wing Loading: 22 - 25oz sq/ft (67 - 76g sq/dm)
Airfoil: Fully-symmetrical, mid-wing
Center of Gravity: 4 - 5" (102 - 127mm) back from the wing's leading
edge measured at the fuselage
Control Throws- Low Rate High Rate
Ailerons: Up & Down 3/8" (10mm) 16° 5/8" (16mm) 13°
Elevator: Up & Down 7/16" (11mm) 9° 5/8" (16mm) 13°
Rudder: Right & Left 1" (25mm) 13° 1-3/4" (44mm) 23°