Construction: Balsa and ply
Wing: Two-piece with pre-hinged control surfaces, flaps can be made
operational for slower takeoffs and light landing speeds
1.2 x 15.1" (30 x 384mm) aluminum joiner tube
Cowl: Painted fiberglass
Wheel Pants: Painted fiberglass
Landing Gear: Taildragger, 3.5" (89mm) foam main wheels, 1" (25.4mm)
rubber tail wheel, one-piece prebent aluminum front section, for a
tricycle setup, use the Nose Gear Conversion set GPMA4568, and
Nose Gear Wheel Pant, GPMA4561 for Float Kit, order GPMA1676
(conversion set, wheel pant and float kit not included, must be
purchased separately)
Motor Mount: Plywood
Engine Mount: Plywood standoff for DLE engine, metal standoffs (not
included) required for mounting O.S. engine
Spinner: Aluminum, 3" (76.2mm) diameter
Fuel Tank: 12oz (355cc) approximately
Warranty: Great Planes Model Manufacturing Company guarantees this
airplane to be free from defects in both materials and workmanship
at the date of purchase. This warranty does not cover any
component parts damaged by use or modification.

ARF Avistar Trainer with clear plastic Windshield, Side Windows
removable black ABS Cockpit Floor, Decals, Landing Gear Wheels and
Instruction Manual

Radio: 4-6 channel
Servos: Five high-torque, additional servo for throttle when using
gas power
Gasoline Power;
Engine: 30-35cc gasoline engine
Electric Power;
63-62-250kV electric motor
ESC: 60A
LiPo Batteries: Two 4S 14.8V 5000mAh, or two 5S 18.5V 5000mAh
LiPo charger and charging bag
Propeller, building and field

Wingspan: 90.5" (2300mm)
Wing Area: 1448 sq in (93.4 sq dm)
Weight: 16.5-17.5 lb (7.5-7.9 kg)
Length: 77.25" (1962mm)
Wing Loading: 26-28 oz/sq ft (79-85 g/sq dm)
Center of Gravity: Between 4-1/2" (138mm) and 5-7/16" (114mm)
back from leading edge of wing measured from fuselage
Control Throws: High Rate Low Rate
Elevator: 3/4" (19mm) 21° 1/2" (13mm) 14°
Rudder: 1-3/8" (35mm) 15° 1" (25mm) 11°
Ailerons: 3/4" (19mm) 17° 1/2" (13mm) 12°