Construction: All wood built-up airframe
Wings: One piece foam core sheeted balsa with plywood wing joiner
Aileron Control: Dual servo, flaperon mixing possible for slower
landing speeds
Cowl: Fiberglass, painted to match MonoKote trim scheme
Covering: MonoKote
Wheel Pants: Fiberglass, painted to match MonoKote trim scheme
Engine Mount: Two-piece composite
Motor Mount: Plywood
Landing Gear: Two-piece prebent aluminum painted white, with
prebent tailwheel wire and steerable tailwheel
Wheels: Foam, two main 3" (76.2mm) diameter, 1" (25.4mm) diameter
tailwheel
Pilot Bust: Painted and detailed
Battery Compartment: Accessed through canopy
Spinner: White plastic 2.5" (63.5mm) diameter
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
the date of purchase. This warranty does not cover any component
parts damaged by use or modification.

ARF F1 Rocket Evo Sport Scale Airplane with wheels, engine mount,
pilot figure, complete hardware packages for either glow or
electric power, wheels, landing gear, and instruction manual

Radio: 4-channel, with minimum 5 servos
Extensions: Two 6" (150mm) for aileron harness
Y Harness: One, for ailerons
ESC: 60A if using brushless motor
Batteries: Two 11.1V 3200mAh LiPo if using brushless motor
Engine: 2-stroke .46-.55 cu in (7-9 cc) OR 4-stroke .70 (11.5 cc) OR
Motor: 55A brushless
Propeller, building and field

Wingspan: 52" (1320mm)
Wing Area: 448 sq in (28.9 sq dm)
Wing Loading: 31 oz/sq ft (95 g/sq dm)
Length: 44" (1120mm)
Weight: 6-7 lbs (2.7-3.1 kg)
Center of Gravity: 3-1/4" (83mm) from the leading edge of the wing at
the fuselage sides
Control Throws: Low High
Elevator, up & down: 1/2" (13mm) 12° 7/8" (22mm) 20°
Rudder, right and left: 1" (25mm) 15° 1-1/2" (38mm) 24°
Ailerons, up & down: 1/4" (6mm) 12° 7/16" (11mm) 20°