- Description
FEATURES
|
Construction: Balsa and ply
Wing: Two-piece, aluminum wing joiner
dual aileron and flap servos
Covering: MonoKote
Fuel Tank: DuBro S24 24oz (710cc) square configuration
Landing Gear: Main, one-piece prebent aluminum with --" (--mm)
diameter foam wheels, tail gear wire with --" (--mm) diameter
wheel
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
the date of purchase. This warranty does not cover component parts
damaged by use or modification.
INCLUDES
|
Prebuilt wing, fuselage and tail sections
REQUIREMENTS
|
Radio: At least 5-channel
40" Servo Extension: Two for aileron servos
16" Heavy Duty Extension: Two for flap servos
12" Servo Extension
Y-Harnesses: Two for connecting aileron and flap servos
Receiver Battery: At least 3200mAh LiFe battery recommended
Adhesives, building supplies and field
For Electric Power;
Brushless Motor: Great Planes RimFire .65 Outrunner recommended
ESC: 160A high voltage
LiPo Batteries: Two 6S 22.2V wired in series, at least 5000mAh
Battery Charger: Compatible with selected battery
BEC Voltage Regulator: 20A max
16" Heavy Duty Extension: For ESC
12" Servo Extension
LiPo charging bag
Propeller: 24x12E if using motor listed above
Motor Mount
For Gasoline Power;
Engine: 3.4-3.7cu in (55-61cc) two-stroke
Throttle Servo: Standard size and torque & 6-8" servo extension
Ignition Battery: At least 1300mAh LiFe battery recommended
Heavy duty On/Off Switch, Prop, Gasoline
SPECIFICATIONS
|
Wingspan: 96.5" (2451mm)
Length: 85" (2159mm)
Weight: 18 - 21lbs (8165 - 9525g)
Wing Area: 2029 sq in (131 sq dm)
Wing Loading: 20-24 oz sq-ft (61-73 g sq-dm)
Center of Gravity (CG): 6-7/16" - 8-1/8" (164mm - 207mm) back from
the leading edge of the wing measured and the fuselage
Control Surface Throws;
Low Rate High Rate
Ailerons, 1-1/8" (28mm) 21° 1-1/2" (38mm) 29°
Elevator, 1/2" (12mm) 8° 7/8" (22mm) 14°
Rudder, 2-1/2" (63mm) 24° 4" (102mm) 41°
Flaps, 1-1/4" (32mm) 17° 3/32" (2.5mm) down elevator was
mixed with flaps to reduce
ballooning