Construction: Balsa and ply
Covering:  MonoKote
Wings: Two-piece with joiner tube
Aileron Control: Dual servo
Cowl: Painted fiberglass
Wheel Pants: Painted fiberglass
Fuel Tank: 24oz (720ml), approximate
Engine Mount: Plywood
Landing Gear: Two-piece prebent aluminum with two 3.5" (90mm) main
wheels and one 1-1/2" (38mm) tailwheel, prebent steel tail gear
Spinner: Aluminum, 5" (127mm) diameter
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
the date of purchase. This warranty does not cover any component
parts damaged by use or modification.

Prebuilt Wing, Fuselage and Tail Sections, Decals, Spinner, Landing
Gear, Fuel Tank, Motor Mount, Engine Mount and Instruction Manual

Radio: 4 channel minimum, 6-channel recommended
Servos: Five 99 oz/in torque, 2-elevator, 2-ailerons, 1-rudder
Two 50 oz/in torque, 1-throttle, 1-optional choke
36" (914mm) Heavy Duty Servo Extensions: Two for elevator servos (one
if using dual servo extension)
12" (305mm) Heavy Duty Servo Extensions: Three, two for aileron
servos, one for throttle, two if not using Y connectors from
receiver to ailerons
6" (152mm) Heavy Duty Servo Extension: One for choke
Heavy Duty Dual Servo Lead: Two for elevator and aileron mixing if
using 4-ch radio
Heavy Duty Switch Harnesses: Two
Engine: 50-55cc two stroke
Muffler: Wrap around Pitts style
Propeller: Follow recommendations for engine
Gasoline and building and field

Wingspan: 90" (2285mm)
Wing Area: 1303 sq in (84 sq dm)
Wing Loading: 34-36 oz/sq ft (104-110 g/sq ft)
Weight: 19.5-20.5lbs (8840-9300g)
Length: 82.5" (2095mm)
Center of Gravity (CG): 7-7/8" (200mm) back from the leading edge of
the wing at the fuselage
Control Throws: Low Rate High Rate
Elevator: (Up & Down) 1/2" (13mm) 6° 3/4" (19mm) 10°
Rudder: (Right & Left) 2-3/4" (70mm) 19° 3-1/4" (83mm) 22°
Ailerons: (Up & Down) 5/8" (16mm) 12° 7/8" (22mm) 17°