Construction: Balsa and plywood.
Wings: One-piece all wood, attaches to fuselage with two ¼-20 nylon
wing bolts (included). Fully symmetrical, mid-wing placement.
Covering: Factory applied MonoKote. Color scheme is White
with swirls of Red, and Light and Dark Blue on the wing and tail
sections. Bottom of wing is large Red and White checkerboard
pattern.
Cowling: Pre-painted White fiberglass-reinforced cowl and wheel
pants.
Canopy: Single, clear plastic.
Landing Gear: .12" (3mm) thick pre-formed aluminum.
Dual Aileron Servos: Standard size with at least 50 oz-in torque.
Building Time: Ready to fly in as few as six to eight hours.
Warranty Period: Great Planes warrants this kit free from defects
in both material and workmanship at date of purchase.
This warranty does not cover any component parts damaged by use or
modification.

Pre-built and covered wings, fuselage and tail assemblies, pushrods,
pre-bent .12" (3mm) main landing gear, .08" (2mm) tailwheel
wire, 3" (76mm) main wheels, 1.25" (31mm) tailwheel, nylon
adjustable engine mount, 14.2oz (420cc) fuel tank, 2¼" (57mm)
Red spinner, plywood servo trays, hardware package, decals, and
photo-illustrated instructions.

Engine: .61 -.91 (10-15cc) (2-stroke)
OR .70 -.91 (11.5-15cc)(4-stroke)

NOTE: For maximum 3D aerobatic performance, choose an engine in the
upper power range.

Muffler: Stock type supplied with engine. Engine mounts in inverted
position.
Radio: Four channel minimum, Six channel computerized radio
recommended for maximum flexibility and performance.
Servos: Standard size 2 ball bearing-Aileron, 2 ball bearing-Elevator
1 high torque-Rudder, 1 standard-Throttle.
Servo Extensions: Two 6" (152mm) for ailerons unless using a 20"
Y-harness
24" Extensions: One for rudder and two 24" for elevator
Y-Harness: One, for aileron servos, unless using computer radio.
Servo reversing Y-harness for elevator servos unless using comp radio
Misc. Items: Glow plug, ¼" foam rubber padding, medium fuel tubing,
fuel filter, propeller, building and field.

Wingspan: 65" (1651mm)
Wing Area: 1072 sq in (69 sq dm)
Weight: 7-7.3lb (3175-3345g)
Wing Loading: 15-15.9 oz/sq ft (46-48 g/sq dm)
Length: 69.5" (1765mm)
Airfoil: Fully-symmetrical mid-wing
Incidence:
Wing: 0°
Stab: 0°
Engine: 1.5° down, 1° right

Center of Gravity: 4-7/8" (124mm) Back from the wing's leading edge
Control Throws (3D) -
Elevator: Up & Down 3" (75mm)
Rudder: Right to Left 4" (102mm)
Ailerons: Up & Down 2-1/8" (55mm)
Flaperons: Up & Down 2" (51mm) assigned to a switch,
not mixed to the elevator
Expo for 3D Rates-no mixing other than expo:
Elevators: -20%
Rudder: -20%
Ailerons: -20%