Construction: Balsa and ply
Wing: One piece
Aileron Control: Dual servo
Covering: High-quality self-adhesive
Landing Gear: Retracts with CNC suspension metal struts, 2.5" (65mm)
diameter main wheels, 1" (25.4mm) tail wheel, spring tail gear
Cowl: Fiberglass, painted to match covering scheme
Canopy: Clear with dashboard and painted pilot bust
Spinner: Plastic 3.1" (80mm) diameter, yellow in color
Engine Mount: Two-piece composite
Motor Mount: Plywood with standoffs
Fuel Tank: Approximately 10oz (300cc)
Warranty: Phoenix Models guarantees this kit to be free from defects
in both material and workmanship at the date of purchase. This
warranty does not cover any component parts damaged by use or
modifications.

Pre-built Wing, Fuselage and Tail Sections with Retracts, Wheels,
Spinner, Fuel Tank, Hardware, Decal Sheet and Instruction Manual

Radio: At least 6-channels
Servos: 1 retract, Futaba S3170G recommended, 4 standard for electric
power, one additional standard servo for throttle if using glow
engine
Receiver Battery: 4.8-6V, 800-1200mAh NiMH

For Glow Power;
Engine: .46-.55 / 2-stroke or .52/4-stroke
Glow Fuel: Aircraft blend
Propeller: To match selected engine

For Electric Power;
Motor: Great Planes Rimfire .46-.55 brushless outrunner recommended
ESC: To match selected motor
Propeller: 10 x 5E-11 x 5E if using recommended motor
Battery: 4000-5000mAh LiPo
Battery Charger: Compatible with selected battery
Building and field equipment

Wingspan: 55.5" (1410mm)
Length: 48.7" (1237mm)
Flying Weight: 6.2-7.05lbs (2.8-3.2kg)
Wing Area: 639 sq in (41.3 sq dm)
Wing Loading: 23.92oz/sq ft (73g/sq dm)
Wing Type: NACA airfoils
Servo mount: (21 x 42mm)
Center of Gravity (CG): 5.1" (130mm) back from the leading edge of
the wing measured at the fuselage
Control Throws: Low High
Ailerons up/down: 0.43" (11mm) 10% expo 0.55" (14mm) 10% expo
Elevator: 0.43" (11mm) 12% expo 0.55" (14mm) 12% expo
Rudder 0.79" (20mm) 15% 1.2" (30mm) 15% expo