Construction: Balsa and ply
Wing: Two-piece with aluminum wing joiner
Aileron Control: Dual servo
Covering: High quality heat shrink covering
Canopy: Clear molded plastic with painted pilot bust and full
cockpit detail, canopy is removable for easy access to battery and
electronics
Landing Gear: Two main and one nose gear metal struts with three
2.5" (65mm) wheels, may use electric retracts (not included)

ARF P-receptor 3D Ducted Fan Jet with Strut Landing Gear, Wheels,
Wooden EDF Belt, Landing Gear Covers and Instruction Manual

Radio: At least 6ch
Servos: Eight mini high-torque (2-elevator, 2-aileron, 2-flap,
1-rudder, 1-steering nose)
Motor: 90mm ducted fan with minimum thrust up 4 kg (NOT CARRIED)
Electronic Speed Control: 120 - 160A
LiPo Battery: 8S-12S at least 4000mAh
Battery Charger: To match selected battery

Wingspan: 55.1" (1400mm)
Wing Area: 620 sq in (40 sq dm)
Wing Loading: 125 g/sq dm (41 g/sq dm)
Weight: 10.6 - 11.4 lbs (4.8 - 5.2 kg)
Length: 60.6" (1540mm)
Wing Type: NACA airfoil
Center of Gravity (CG): 6.5-6.7" (165-170mm) back from the leading
edge of the wing at the fuselage
Control Throws: Low High
Aileron, up & down: 12mm 10% expo 15mm 10% expo
Elevator, up & down: 12mm 12% expo 15mm 12% expo
Rudder, right and left: 20mm 15% expo 30mm 15% expo