Construction: Balsa and ply
Wing: Two-piece
aluminum wing joiner
Aileron Control: Dual servo
Cowl: Fiberglass
Landing Gear: Retract and CNC strut gear
Wheels: Three foam
Covering: High quality heat shrink covering
Motor Mount: Plywood
Engine Mount: Two-piece composite
Spinner: Red plastic, 2.3" (58mm) diameter
Cockpit: Molded plastic with clear windows

ARF 1/7 scale PC 9 Pilatus Airplane with Spinner. Fuel Tank,
Landing Gear, Wheels and Instruction Manual

Radio: 6-channel
Servos: 6 standard (2-aileron, 1-elevator, 1-rudder 1-throttle if
using glow engine 2-retracts
Retract Servos: 2, Futaba S3170G recommended
Receiver Battery: 4.8-6V, 800-1200mAh NiMH
Electric Power:
Motor: Brushless outrunner, Great Planes Rimfire .46-.55 recommended
Electronic Speed Control: 50-80A
LiPo Battery: 4-6 cells 4000-5500mAh
Battery Charger: Compatible with selected LiPo
LiPo charging bag
Propeller to match selected motor
Glow Power:
Engine .46-.55 2-stroke or .52 4-stroke glow engine
Fuel, glow starter and propeller to match selected engine
Field and maintenence equipment

Wingspan: 58.6" (1490mm)
Length: 50" (1270mm)
Flying Weight: 7.05 - 7.49 lbs (3200-3400 g)
Wing Area: 604 sq in (39 sq dm)
Wing Loading: 26.87 oz/sq ft (82 g/sq dm)
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity (CG): 3.5 - 3.9" (90 - 100mm) back from the
leading edge of the wing at the fuselage side
Wing Type: Naca airfoils
Configuration: Low wing
Control Throws: Low High
Ailerons, 0.31" (8mm) 10% expo 0.39" (10mm) 10% expo
Elevator, 0.31" (8mm) 12% expo 0.39" (10mm) 12% expo
Rudder, 0.98" (25mm) 15% expo 1.6" (40mm) 15% expo