Construction: Laser cut balsa and plywood
Wing: Two piece
Aileron and Flap Control: Dual servo
Covering: High quality heat shrink covering
Cowl: Painted fiberglass
Landing Gear: Air retracts with CNC machined suspension metal struts
tail gear, prebent wire
Spinner: 4.7" (120mm) diameter red plastic
Fuel Tank: Approximately 16oz (473cc)
Motor Mount: Three plywood plates with aluminum standoffs
Engine Mount: Plywood with aluminum standoffs
Warranty Period: 90 day limited warranty

Pre-built Wing, Fuselage and Tail Sections, Retractable Landing Gear,
Spinner, Fuel Tank, Motor Mount, Engine Mount, Pilot Bust and
Instruction Manual

Radio: 8-channel minimum
Servos: Nine standard size high torque, 2-aileron, 2-elevator,
2-flap, 1-rudder, 1-throttle, 1-air valve control
Receiver Battery: 6V 2400-2600mAh NiMH
For Electric Control;
Motor: Brushless outrunner, Rimfire 1.60 recommended
Electronic Speed Control: 120-160A
LiPo Battery: 12S 5000-6000mAh
For Gasoline Power;
Engine: 30/35cc gasoline engine
Prop for glow engine or motor, field and maintenance equipment
Building and field equipment

Wingspan: 80.3" (2040mm)
Length: 70.7" (1797mm)
Flying Weight: 14.5 - 16.5lbs (6600 - 7500g)
Wing Area: 1176 sq in (76 sq dm)
Wing Loading: 31.13 oz/sq ft (95g/sq dm)
Wing Type: Naca airfoils
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity (CG): 4.7" (120mm) back from leading edge of wing
measured at the fuselage
Control Throws: Low Rate High Rate
Ailerons, up/down: 0.51" (13mm) 10% expo 0.59" (15mm) 10% expo
Elevator, up/down: 0.51" (13mm) 12% expo 0.59" (15mm) 12% expo
Rudder, right/left: 1.2" (30mm) 15% expo 1.8" (45mm) 15% expo
Flap, Mid 0.59" (15mm) down, Landing 0.98" (25mm) down