- Description
50-61cc 1:4 3/4 S-pitfire Scale Warbird from Phoenix Model.
For Intermediate Flyers.
FEATURES
|
Construction: Balsa and ply
Wing: Two-piece, functional flaps
Landing Gear: Air-retract with CNC machined metal suspension struts,
air valve system with quick-connect air hose
Wheels: Main, 4.5" (115mm) diameter, tail, 1.8" (47mm) diameter
Covering: Scale details printed on high quality iron on covering
Cowl: Fiberglass
Wheel Pants: Fiberglass
Spinner: Plastic, 6" (150mm) diameter, scale type
Motor Mount: Plywood
Engine Mount: Plywood with aluminum standoffs
Cockpit: Detailed with instrument panel, painted pilot bust
Canopy: Two-piece, front section slides rearward
Fuel Tank: Approximately 24oz (750cc)
Warranty: Phoenix Model guarantees this kit to be free from defects
in both materials and workmanship at date of purchase by the
purchaser
INCLUDES
|
Prebuilt and covered Wing, Tail and Fuselage sections, Landing Gear,
Fuel Tank, Pilot Bust, Spinner and Instruction Manual
REQUIREMENTS
|
Radio: At least 8-channel
Servos: 9 standard size, high torque (2-elevator, 2-flap, 1-rudder,
2-aileron, 1-throttle, 1-air valve control)
Receiver Batteries: Two 6.0V NiMH, at least 2400mAh
Building and field equipment
Electric Power;
Brushless Motor: Great Planes Rimfire 50cc recommended
ESC: High-voltage, such as the Castle Creations HV Series
Propeller: 22x8" - 26x10"
LiPo Battery: Two 6S
Battery Charger & Charging Bag: Compatible with selected 6S LiPo
batteries
Gasoline Power;
Engine: .50-.61cc 2-stroke gasoline
Propeller: To match selected engine
SPECIFICATIONS
|
Wingspan: 95" (2410mm)
Length: 86" (2177mm)
Flying Weight: 24.2 - 26.4lbs (11,000 - 12,000g
Wing Area: 1486 sq in (96 sq dm)
Wing Loading: 37.7oz/sq/ft (115g/sq dm)
Wing Type: NACA airfoils
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Small Wing Joiner Diameter: 0.75" (19mm)
Small Wing Joiner Length: 25.2" (540mm)
Large Wing Joiner Diameter: 1.2" (32mm)
Large Wing Joiner Length: 26.4" (670mm)
Center of Gravity (CG): 6.3" (160mm) back from leading edge of wing
measured at the fuselage
Control Throws: Low Rate High Rate
Ailerons, up/down: 0.47" (12mm) 10% expo 0.59" (15mm) 12% expo
Elevators, up/down: 0.47" (12mm) 12% expo 0.55" (15mm) 12% expo
Rudder, right/left: 1.2" (30mm) 15% expo 1.8" (45mm) 15% expo
Landing Gear, down: 0.59" (15mm) 0.98" (25mm) down
If a replacement fuel tank is required, the 24oz DuBro (DUBQ0224),
tank can be used with the purchase of the Gasoline Conversion Kit
DUBQ0675.
Also, the 24oz Sullivan (SULQ1444) can be used with their Gasoline
Conversion Kit, SULQ2684.
Slight modification may be required when installing any
aftermarket fuel tank.