Construction: All wood, laser cut
Wing: Two-piece with struts
Covering: High quality self-adhesive
Cowl: Fiberglass, painted to match covering
Canopy: Clear plastic with painted-on frame lines, instrument panel
detail and pilot bust
Spinner: 3.75" (95mm) diameter, constructed of plastic, black in
color
Landing Gear: Two-piece prebent aluminum, painted white, two
5.25" (133mm) diameter main rubber wheels, 2" (51mm) diameter
rubber tail wheel
Motor Mount: Plywood with aluminum standoffs
Engine Mount: Four rubber isolated aluminum standoffs
Fuel Tank: Approximately 24oz (750cc)

Prebuilt Fuselage, Wing and Tail Sections, Landing Gear, Wheels,
Cockpit, Instrument Panel, Pilot and Instruction Manual

Radio: At least 8-channel
Servos: Eight standard size high torque, 2 aileron; 2 flap;
2 elevator; 2 rudder; 1 throttle (if using gasoline engine)
Receiver Batteries: Two 6.0V 2400-2600mAh NiMH
Building and field equipment
For Electric Power;
Motor: Rimfire 50cc recommended
Electronic Speed Control: 120A
Lipo Battery: 33.3-55.5V, 9-15S
Battery Charger: Compatible with selected battery
Propeller: 22x8E to 26x10E
For Gasoline Power:
Engine: 50- 61cc 2-stroke gasoline
Propeller: compatible with selected engine
Two stroke oil

Wingspan: 126" (3200mm)
Length: 74.8" (1901mm)
Flying Weight: 23.1 - 26.4lbs (10.5 - 12kg)
Wing Area: 1464 sq in (94.56 sq dm)
Wing Loading: 36.04oz sq ft (110g/sq dm)
Wing Type: Naca airfoils
Servo mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity (CG): 5.8" (147mm) back from leading edge of the
wing measured at the fuselage