Construction: Balsa and plywood
Wing: Two piece with aluminum joiner
Aileron Control: Dual servo
Covering: High quality heat shrink covering
Cowl: Painted fiberglass
Landing Gear: Main-pre-bent painted aluminum, nose gear-spring wire
2.5" (63mm) diameter wheels
Engine Mount: Plywood
Motor Mount: Two-piece composite plastic
Spinner: Plastic 2.28" (58mm) diameter
Fuel Tank: Approximately 10oz (300cc)

Cessna 182 ARF with Engine and Motor Mounts, Fuel Tank, Spinner,
Decals, Landing Gear with Wheels, Painted Pilot Figure

Radio: 6-channel minimum
Servos: 7 standard (2-aileron, 2-flap, 1-elevator, 1-rudder,
1-throttle (if using glow engine)
Receiver Battery: 4.8-6V / 800-1200mAh NiMH
For Glow Power;
Engine: .46-.55 2-stroke or .52 4-stroke engine
Glow fuel and starter
For Electric Power;
Motor: Brushless outrunner Rimfire .46-.55
ESC: 50 - 80A
Battery: 6S LiPo 4000-5500mAh
Battery Charger: Compatible with selected battery
Propeller depending on engine or motor selected

Wingspan: 65.6" (1667mm)
Length: 51" (1295mm)
Flying Weight: 116 - 120 oz (3300-3400 g)
Wing Area: 540 sq in (34.2 sq dm)
Wing Loading: 27.85 oz/sq dm (85 g/sq dm)
Center of Gravity: 65-70mm (2.6-2.8") Back from the leading
edge of the wing at the fuselage
Airfoil: NACA
Control Throws Low Rate High Rate
Ailerons up/down: 8mm 10% expo 10mm 10% expo
Elevator up/down: 8mm 12% 10mm 12%
Rudder left/right: 20mm 15% 30mm 15%
Flaps: Mid 15mm down Landing 20mm down