- Description
.46-.55 1:9 1/4 Scale A26 Invader Scale Warbird from Phoenix Model.
For Intermediate Flyers.
FEATURES
|
Construction: Balsa and ply
Wing: Two-piece, functional flaps
Landing Gear: Air-retract with CNC machined metal suspension struts,
air valve system with quick-connect air hose
Wheels: Three, 4" (100mm) diameter
Covering: High-quality self-adhesive
Cowls: Fiberglass
Motor Mounts: Plywood
Engine Mounts: Two-piecce composite plastic
Cockpit: Detailed with instrument panel, painted pilot bust
Canopy: One-piece with painted-on frame lines
Fuel Tanks: Two, approximately 12oz (360cc)
Warranty: Phoenix Model guarantees this kit to be free from defects
in both materials and workmanship at date of purchase by the
purchaser
INCLUDES
|
Prebuilt and covered Wing, Tail and Fuselage sections, Landing Gear,
Fuel Tank, Pilot Bust, Decals and Instruction Manual
REQUIREMENTS
|
Radio: At least 8-channel
Servos: 9 standard size, high torque (1-elevator, 2-flap, 1-rudder,
2-aileron, 2-throttle, 1-air valve control)
Receiver Batteries: Two 6.0V NiMH, at least 2400mAh
Building and field equipment
Electric Power;
Brushless Motors: Two Great Planes Rimfire .32 recommended
ESCs: Two high-voltage, such as the Castle Creations HV Series
Propeller: 12x6 - 13x8 electric
LiPo Battery: Two 4S at least 4500mAh
Gasoline Power;
Engines: Two .46-.55 2-stroke gasoline
Propeller: To match selected engine
SPECIFICATIONS
|
Wingspan: 90.5" (2300mm)
Length: 65.5" (1664mm)
Flying Weight: 15.4 - 17.6lbs (7000 - 8000g
Wing Area: 951 sq in (61.4 sq dm)
Wing Loading: 34.41 oz/sq/ft (105 g/sq dm)
Wing Type: NACA airfoils
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity (CG): 3.9" (100mm) back from leading edge of wing
measured at the fuselage
Control Throws: Low Rate High Rate
Ailerons, up/down: 0.35" (9mm) 10% expo 0.55" (14mm) 12% expo
Elevators, up/down: 0.43" (11mm) 12% expo 0.55" (14mm) 12% expo
Rudder, right/left: 0.79 (20mm) 15% expo 1.4" (35mm) 15% expo
Landing Gear, down: 0.59" (15mm)