Construction: Balsa and ply
Wings: Bolt-on two piece with aluminum wing tube
Aileron Control: Dual servo
Cowl: Fiberglass, painted to match color scheme
Covering: High-quality film
Engine Mount: One-piece composite plastic
Landing Gear: Aluminum hi-grade for main gear, spring wire for tail
gear
Fuel Tank: Approximately 10oz (296cc)
Wheel Pants: Fiberglass, painted to match color scheme
Wheels: Main Rubber, 2.5" (63.5mm) diameter, 1" (25.4mm) tailwheel
Building Time: Ready to fly in 2-4 hours

ARF Edge 540 .46 Airplane, Fuel Tank, Landing Gear, Wheels, Engine
Mount, Hardware to Mount Electric Motor, precovered Wings, Fuselage
and Tail sections, Pilot Bust, Decal Sheet and Instruction Manual

Radio: At least 4-channel
Servos: Five, (1-elevator, 1-throttle (for glow power), 2-ailerons,
1-rudder)
Glow Power;
Engine: 2 stroke .46-.55cu in, or 4-stroke .52-.71cu in
Electric Power:
Brushless Motor: Great Planes ElectriFly Rimfire .46 42-60-800
recommended
Electronic Speed Control: 60A
LiPo Battery: Compatible with selected motor
Battery Charger: Compatible with selected battery
Propeller: Compatible with selected engine or electric motor
Building and field equipment

Wingspan: 55.5" (1410mm)
Weight: 5.8-6.17lb (2650-2800g)
Length: 54" (1370mm)
Airfoil: Fully symmetrical
Configuration: Mid wing
Center of Gravity, (CG): 3.1-3.3" (80-85mm) back from the leading
edge of the wing at the fuselage
Control Throws- Low Rate High Rate
Ailerons: Up & Down 0.31" (8mm) 0.47" (12mm)
Elevator: Up & Down 0.31" (8mm) 0.47" (12mm)
Rudder: Right & Left 1.10" (28mm) 1.57" (40mm)