- Description
This is the Radio Controlled, Gasoline or Electric Powered Almost Ready to Fly
Extra 260 30-35cc 1:3 3/4 scale Aerobatic Airplane from Phoenix Model.
For Intermediate Flyers
FEATURES
|
Construction: Balsa and plywood
Wing: Bolt-on, two-piece
Hatch: Removable for access to radio equipment
busts and cockpit detail
Cowl:
Landing Gear: Two-piece prebent aluminum with --" (--mm) diameter
main wheels, --" (--mm) tailwheel
Wheel Pants:
Spinner: 3.7" (95mm) diameter
Warranty: Phoenix Model guarantees this kit to be free from defects
in both materials and workmanship at date of purchase by the
purchaser.
INCLUDES
|
Prebuilt Wing, Tail and Fuselage sections, Landing Gear, Wheels,
Spinner, Decals, Hardware and Instruction Manual
REQUIREMENTS
|
Radio: At least 8-channel
Servos: Five high torque (2-aileron, 2-elevator, 1-rudder)
One standard servo for throttle if using gasoline engine
Receiver Battery: 6.0V at least 2200mAh
Building and field equipment
Electric Power;
Brushless Motor: Electrifly RimFire 1.60 recommended
Electronic Speed Control: To match selected motor
LiPo Battery:
Battery Charger: Compatible with selected battery
Propeller: To match selected motor
Gasoline Power;
Engine: 30-35cc two stroke
Ignition Battery: 6.0V at least 2200mAh
Building and field equipment
Propeller: To match selected engine
SPECIFICATIONS
|
Wingspan: 78.7" (2000mm)
Length: 72.7" (1848mm)
Wing Area: 1236 sq in (79.7 sq dm)
Wing Loading: 23.27 oz/sq in (71g/sq dm)
Wing Type: NACA airfoils
Weight: 12.6 - 12.8lbs (5700 - 5800g)
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity (CG): 6.3 - 6.5" (160 - 165mm) back from leading
edge of wing measured at the fuselage
Control Throws- Low High
Ailerons 0.47" (12mm) 10% expo 0.59" (15mm) 10% expo
Elevator 0.43" (11mm) 12% expo 0.59" (15mm) 12% expo
Rudder 1.4" (35mm) 15% expo 2.4" (60mm) 15% expo