Construction:
Wing:
Aileron Control: Dual servo
Covering: High-quality self-adhesive
Cowl: Fiberglass, painted to match trim scheme of covering
Landing Gear: Main, two-piece prebent aluminum with --" (--mm)
diameter wheels and wheel pants
tail, prebent wire with --" (--mm) diameter wheel
Motor Mount: Plywood
Engine Mount: , two-piece composite
Spinner: 2.3" (58mm) diameter plastic, red in color
Fuel Tank: --oz (--cc)
Canopy: Clear, with painted pilot figure
Warranty: Phoenix Model guarantees this kit to be free from defects
in both materials and workmanship at date of purchase by the
purchaser

Prebuilt Wing, Fuselage and Tail assemblies, Motor Mount, Engine
Mount, Spinner, Fuel Tank, Wheels, Canopy and Instruction Manual

Radio: At least 4-channels
Servos: Five standard (2-aileron, 1-elevator, 1-rudder, 1-throttle
if using glow engine)
Receiver Battery: 4.8-6V 800-1200mAh NiMH
Building and field equipment
Propeller: To match selected motor or engine
Building and field equipment
For Electric Power;
Brushless Motor: Rimfire .46-.55 recommended
ESC: To match selected motor
LiPo Battery: 5-6 cells, 4000-5500mAh
LiPo charging bag
For Glow Power;
Engine: .46-.55 2-stroke or .52 4-stroke
Glow fuel, glow starter

Wingspan: 61" (1550mm)
Length: 50.8" (1291mm)
Flying Weight: 6.2-6.6 lb (2.8-3.0 kg)
Wing Area: 650 sq in (42 sq dm)
Wing Loading: 21.62 oz/sq in (66 g/sq dm)
Wing Type: NACA airfoils
Center of Gravity (CG): 4" (104mm) back from leading edge of wing
measured at the fuselage
Control Throws: Low Rate High Rate
Ailerons, up/down: 0.39" (10mm) 10% expo 0.47" (12mm) 10% expo
Elevators, up/down: 0.39" (10mm) 12% expo 0.47" (12mm) 12% expo
Rudder, right/left: 0.79" (20mm) 15% expo 1.2" (30mm) 15% expo