- Description
Phoenix Model Pilatus Mk.2.
For Intermediate Modeler/Flyers
FEATURES
|
Construction: Balsa and ply
Wing: Bolt-on two-piece with aluminum wing joiner, functional scale
flaps
Covering: Factory covered in high quality film
Landing Gear: Air retracts with CNC machined metal struts
Canopy: Clear molded plastic with dual pilot figures and dashboards
Motor Mount: Plywood
Engine Mount: Two-piece composite plastic
Spinner: Red plastic 3.5" (90mm) diameter
INCLUDES
|
Prebuilt Wing, Fuselage and Tail Assemblies, Retracts, Main Wheels
Tailwheel, Spinner, Engine Mount, Motor Mount, Instruction Manual,
Fuel Tank, Decal Sheet
REQUIREMENTS
|
Gasoline Power;
Engine: 20-30cc
2-cycle oil, ignition battery
Electric Power;
Brushless Motor: Great Planes Rimfire 1.20 recommended
ESC: at least 80A if using the Rimfire 1.20 motor listed above
LiPo Battery: 5-6 cells, 5500 - 6000mAh
Charger, charging bag
Propeller: Compatible with selected engine or motor
Radio: 6-channel minimum
Servos: 10 standard size, high-torque, 2-aileron; 2-flap; 2-elevator
1-rudder; 1-steering nose; 1-retract, 1-throttle (if using gas
engine)
Receiver Battery: 4.8-6V / 2000mAh NiMH
Field and maintenance equipment
SPECIFICATIONS
|
Wingspan: 69.7" (1772mm)
Length: 79.5" (2019mm)
Wing Area: 57.6sq dm (893sq in)
Wing Loading: 37oz/sq ft (113g/sq dm
Weight: 225 - 254 oz (6.4 - 7.2 kg)- airframe weight 146 oz or 4.15kg
Wing Type: NACA Airfoils
Servo Mount: 21x42mm
Center of Gravity (CG): 6.1" (155mm) back from leading edge of wing
measured at the fuselage
Control Throws: Low Rate High Rate
Ailerons, up/down: --" (--mm) --% expo --" (--mm) --% expo
Elevator, up/down: --" (--mm) --% expo --" (--mm) --% expo
Rudder, right/left: --" (--mm) --% expo --" (--mm) --% expo
Flap, Mid --" (--mm) down, Landing --" (--mm) down