- Description
Almost Ready to Fly Stinson Hing Wing Scale Airplane from Phoenix Models.
For Intermediate Flyers.
FEATURES
|
Construction: All balsa and plywood
Wing: Bolt-on two-piece, aluminum wing joiner
Aileron Control: Dual servo
Cowl: Painted fiberglass
Covering: High quality heat shrink covering, color scheme is red and
beige
Canopy: Clear, removable for easy access to electronics, painted
pilot bust
Spinner: Red plastic 2.3" (58mm)
Engine Mount: Two-piece composite
Motor Mount: Plywood
Landing Gear: Main, prebent aluminum, tail gear, spring loaded with
1" (25.4mm) tailwheel, two 2.5" (63.5mm) main wheels
Fuel Tank: Approximately 10oz (295cc)
INCLUDES
|
ARF Stinson Scale Airplane with Fuel Tank, Motor Mount, Engine
Mount, Landing Gear, Spinner, Pilot Bust and Instructions
REQUIREMENTS
|
Radio: 4-channel with four servos for electric power, one throttle
servo if using glow power
Glow Power;
Engine: .46-.55 cu in (7.5-9.0cc) 2-stroke
.52-.61 cu in (8.5cc) 4-stroke
Receiver Battery: 4.8-6V / 800-1200mAh NiMH
Glow fuel, prop, glow starter,
Electric Power;
Brushless Motor: Rimfire .46-.55
ESC: 50-70A brushless compatible
Battery: 4000-5000mAh LiPo battery
Battery Charger: Compatible with selected battery
Prop to match selected motor
Building and field equipment
SPECIFICATIONS
|
Wingspan: 63.31" (1604mm)
Length: 48.1" (1224mm)
Flying Weight: 5.7 - 6.6lbs (2.6 - 3.0kg)
Wing Area: 581 sq in (37.5 sq dm)
Wing Loading: 24.41 oz/sq ft (74.5g/sq dm)
Airfoil: NACA
Center of Gravity: 2.6" (65mm) back from the leading edge of the
wing at the fuselage
Control Throws
Ailerons: Low: 10mm up/down, 10% expo
High: 12mm up/down, 10% expo
Elevators: Low: 8mm up/down, 12% expo
High: 10mm up/down, 12% expo
Rudder: Low: 25mm right/left, 12% expo
High: 40mm right/left, 15% expo