- Description
1/6 scale Almost Ready to Fly Strega Airplane.
For Intermediate Pilots.
FEATURES
|
Construction: Balsa and ply
Wing: Two-piece with aluminum joiner tube and recessed areas for
wheel wells
Cowl: Painted fiberglass
Covering: High quality heat shrink covering
Landing Gear: Retracts with CNC machined metal struts, spring tail
gear, plastic wheel wells in wing
Wheels: 3.25" (82.5mm) main, 1.5" (38mm) tailwheel
Spinner: Red plastic 3.7" (95mm) diameter
Top Hatch: Removes for easy access to battery and radio equipment
Engine Mount: Two-piece composite
Motor Mount: Plywood
Fuel Tank: Approximately 16oz (473cc)
Warranty Period: 90 day limited warranty
INCLUDES
|
Prebuilt Wing, Fuselage and Tail Assemblies, Retracts, Main Wheels
Tailwheel, Spinner, Engine Mount, Motor Mount, Instruction Manual,
Fuel Tank, Decal Sheet
REQUIREMENTS
|
Gasoline Power;
Engine: 30cc
2-cycle oil, ignition battery
Electric Power;
Brushless Motor: Great Planes Rimfire 1.20 recommended
ESC: at least 80A if using the Rimfire 1.20 motor listed above
LiPo Battery: 5-6 cells, 5500 - 6000mAh
Charger, charging bag
Propeller: Compatible with selected engine or motor
Radio: 6-channel minimum
Servos: 7 standard size, high-torque, 2-aileron; 2-flap; 1-elevator
1-rudder; 1 throttle (if using gas engine)
Retract Gear Servos: Two, Futaba S3170G recommended
Receiver Battery: 4.8-6V / 2000mAh NiMH
Field and maintenance equipment
SPECIFICATIONS
|
Length: 62.5" (1587mm)
Wingspan: 68.9" (1750mm)
Flying Weight: 11.9-13.2lbs (5400-6000g)
Wing Area: 1037 sq in (66.9 sq dm)
Wing Loading: 26.21oz/sq ft (80g/sq dm)
Wing Type: NACA airfoils
Servo Mount: 0.83 x 1.6" (21mm x 42mm)
Center of Gravity (CG): 6.1" (155mm) back from leading edge of wing
measured at the fuselage
Control Throws: Low Rate High Rate
Ailerons, up/down: 0.43" (11mm) 10% expo 0.51" (13mm) 10% expo
Elevator, up/down: 0.43" (11mm) 12% expo 0.51" (13mm) 12% expo
Rudder, right/left: 1.2" (30mm) 15% expo 1.6" (40mm) 15% expo
Flap, Mid 0.59" (15mm) down, Landing 0.79" (20mm) down