Construction: Balsa and ply
Wing: Two-piece with aluminum wing tube, NACA airfoils
Aileron Control: Dual servo
Covering: High quality heat shrink covering
Cowl: Painted fiberglass
Aileron Control: Dual servo
Motor Mount: Plywood
Engine Mount: Two-piece composite
Landing Gear: Mechanical retracts with CNC machined metal struts,
2.5" (65mm) foam wheels-see COMMENTS below, spring tail gear with
1" (25.4mm) rubber tailwheel
Fuel Tank: Approximately 10oz (300cc)
Spinner: 3" (76mm) plastic, yellow in color
Building Time: Ready to fly in several hours

ARF Strega Mk2 Airplane with Mechanical Retracts, Spinner, Pilot
Bust, Motor Mount, Engine Mount, Wheels, Fuel Tank and Instruction
Manual

Radio: At least 6-channel
Servos: Five standard (2-aileron, 1-rudder, 1-elevator, 1-throttle
if using glow power)
Retract Servo: 1-low profile
Glow Power-
Engine: 2-stroke .46-.55 cu in, OR 4-stroke .52 cu in glow engine
Servo: For throttle
Propeller: To match selected engine
Glow fuel, glow starter, field equipment
Electric Power-
Outrunner Brushless Motor: 1000-1400kV
ESC: 50-80A
Propeller: To match selected motor
LiPo Battery: 4-6 cell 4000-5000mAh
Charger: To match selected battery
LiPo charging sack, field equipment

Wingspan: 55.5" (1410mm)
Length: 50.3" (1278mm)
Weight: 7.05 - 7.5lbs (3.2 - 3.4kg)
Wing Area: 640 sq in (41.3 sq dm)
Wing Loading: 24.58 oz/sq in (75 g/sq dm)
Wing Type: NACA airfoils
Servo mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity (CG): 5.1" (130mm) back from the leading edge of
the wing at the fuselage
Control Throws- Low High
Ailerons: 0.31" (8mm) 10% expo 0.39" (10mm) 10% expo
Elevator: 0.31" (8mm) 12% expo 0.39" (10mm) 12% expo
Rudder: 0.79" (20mm) 15% expo 1.18" (30mm) 15% expo