- Description
FEATURES
|
Construction: Balsa and ply, CAD drawn, laser cut and factory jig
assembled
Wing: Two-piece bolt-on, aluminum wing joiner
Aileron Control: Dual servo
Covering: Premium adhesive backed
Landing Gear: One-piece prebent aluminum with 3" (76mm) diameter
front foam wheels, 1" (25.4mm) diameter rubber tailwheel
Cowl: Painted fiberglass
Wheel Pants: Painted fiberglass
Engine Mount: Two-piece composite
Motor Mount: Plywood
Hatch: Wooden, magnetically attaches on top of fuselage for easy
access to battery or fuel tank
Fuel Tank: 14oz (420cc) approximately
INCLUDES
|
CAD-drawn, laser cut, factory assembled wing and covered fuse, wing
and tail parts
Painted fiberglass cowling and wheel pants
Landing gear
Hardware package
Painted pilot figure
REQUIREMENTS
|
Radio: 4-ch w/4 standard servos (electric) or 5 standard servos
glow
Electric Power-
Electric motor: 1200-1700 watt brushless outrunner
LiPo Battery: 4S at least 5000mAh, or 6S at least 4000mAh
Battery Charger: Compatible with selected LiPo battery
LiPo charging bag
ESC: To match selected motor
Glow Power-
Engine: .60-.75 2-stroke or .60-.90 4-stroke
Fuel, glow starter, prop, field and building equipment
SPECIFICATIONS
|
Wing Span: 64" (1625mm)
Wing Area: 847 sq in (54.6 sq dm)
Length: 57" (1447mm)
Flying Weight: 7 - 8.25 lbs. (3175 - 3742 g)
Wing Loading: 19-22 oz/sq ft (58-64 g/sq dm)
Airfoil: Semi-symmetrical
Configuration: Mid wing
Center of Gravity (CG): 3-1/2" - 4-3/8" behind of the leading edge of
the wing at the fuselage side
Control Throws- Low Rate High Rate
Elevator up & down: 3/4" (19mm) 15-50% expo 1" (25.4mm) 50-70% expo
Aileron up & down: 5/8" (16mm) 15-50% expo 1" (25.4mm) 50-70% expo
Rudder right & left: 1" (25.4mm) 15-40% expo 1-1/2" (38mm) 50% expo