Construction: CAD drawn, laser cut, factory jig assembled balsa and
ply
Wing: Two-piece with aluminum joiner
Aileron Control: Dual servo
Covering: Covered with premium quality self-adhesive film
Cowl: Painted fiberglass
Landing Gear: Main one-piece prebent aluminum, 3.5" (89mm) foam
wheels, Steerable wire tail gear with 1" (25.4mm) rubber wheel
Engine Mount: Two-piece nylon
Motor Mount: Laser cut plywood, adjustable
Fuel Tank: 14oz (420cc) approximate
Hatch: Attaches to fuselage with magnets

Pre-assembled, pre-covered wood fusealage, wing and tail surfaces
Fiberglass cowling and wheel pants
Pre-installed clear plastic windshield and side windows
Wheels, pushrods, & hardware pack
Illustrated step-by-step instruction manual
Engine mount & fuel tank for glow engines
Motor mount
Hardware pack

Radio: 4-channel w/4 standard size high torque servos
(throttle servo if using glow engine)
Y-Harness: For aileron servos
12" (305mm) Extensions: Two for aileron servos
Electric Power;
Brushless Motor: 500 watt (3528 - 1000kv)
Electronic speed Control: To match selected motor
LiPo Battery: 4- 6S 4000-5000mAh
Charger, charging bag, prop
Glow Power;
Engine: .40 - .53 cu in (6.5 - 8.7cc) 2-stroke OR
.50 - .61 cu in (8.1 - 10cc) 4-stroke
Fuel, glow starter, propeller, building & field equipment
Throttle servo: Standard size and torque

Wingspan: 78" (1980mm)
Wing Area 1148 sq in (74.1 sq dm)
Length 65" (1651mm)
Flying Weight 8 - 8.5 lbs (2720 - 2950 g)
Wing Loading 12 - 13 oz/sq ft (36 - 39 g/sq dm)
Configuration: Low wing
Airfoil: Flat bottom
Center of Gravity (CG): 4-5" (102-127mm) aft of the leading of the
wing measured at the fuselage
Control Throws:
Elevator, up & down: 3/4" (19mm)
Rudder, left & right: 1" (25.4mm)
Ailerons, up & down: 1" (25.4mm)