Construction: Balsa and ply, all pieces CAD-drawn, laser-cut and jig
assembled
Wing: 2-piece, factory painted airfoil shaped wing struts
Aileron Control: Dual servo
Covering: High quality premium polyester self adhesive
Cowl: Factory painted fiberglass
Wheel Pants: Factory painted fiberglass
Landing Gear: One piece prebent aluminum 0.16" (4mm) thick, 4"
(102mm) diameter foam main wheels, 1" (25.4mm) rubber tailwheel
with leaf spring tail wheel assembly
Motor Mount: Prebuilt adjustable laser cut plywood (glow and
gasoline engine mounts not supplied)

Pre-built, pre-covered wood fuselage, wing and tail surfaces
CAD-drawn, laser cut balsa and ply parts
Fiberglass cowling and wheel pants
Aluminum landing gear
Hardware package
Decals
Illustrated step-by-step assembly manual

Radio: 6-Channel with 7 heavy-duty servos, at least 75 oz/in torque
Ailerons (2), Elevator (1), Rudder (1), Throttle (1), Flaps (2)
Servo Extensions:
Two 24" for ailerons
Two 6" for flaps
One 36" for elevator
Y-Harnesses: Two, one standard for ailerons, one reversing type for
flaps
Glow or Gasoline Power-
Glow Power: 2-Stroke (1.2-1.5 cu in) or 4-Stroke (1.2-1.8 cu in)
Gas Power: 1.2-1.5 cu in
Fuel Tank: An approximate 24oz (710cc) tank can be used. A Gasoline
Conversion Stopper (DUBQ0675) must be used with DuBro brand tanks
if using a gasoline engine. Other brand of tanks will also require
a similar stopper. It is best to measure fuel tank and available
area in fuselage to determine correct capacity and shape of fuel
tank required.
Electric Power-
Brushless Motor: 1600 watt (6320 - 250kv) not carried
ESC: To match selected motor
Lipo Battery Pack: 8-10S not carried
**Contact Sig for suitable brushless motor and LiPo battery**
Battery Charger: To match selected battery
Prop, Field and building equipment

Wingspan: 110" (2794mm)
Wing Area: 1522 sq in (98.2 sq dm)
Length: 75.75" (1924mm)
Flying Weight: 11 - 13lbs (4990 - 5897g)
Wing Loading: 17 - 20 oz/sq ft (51 - 60 g/sq dm
Configuration: High wing
Center of Gravity (CG): 4-1/2" (114mm) back from the leading edge of
the wing at the fuselage sides
Control Throws Low Rate High Rate
Ailerons (up & down): 1-1/16" (26mm) 1-3/8" (35mm)
Elevator (up & down): 1-3/16" (30mm) 1-5/8" (41mm)
Rudder (right & left): 1-3/4" (44mm) 1-3/4" (44mm)