- Description
FEATURES
|
Construction: Balsa and ply
Wing: Two-piece with super strong aluminum wing joiner tube
Aileron Control: Dual servo
Cowl: Factory painted fiberglass
Wheel Pants: Factory painted fiberglass
Covering: High quality premium polyester self adhesive
Landing Gear: One-piece prebent aluminum, 2.5" (63mm) main wheels
1" (25.4mm) diameter rubber tailwheel
Spinner: White plastic 2.25" (57mm) diameter
Motor Mount: Pre-assembled plywood
Engine Mount: Two-piece composite
Fuel Tank: 12oz (360cc) approximate
Hatch: Wooden, attaches magnetically to the fuselage for easy access
to the battery/radio compartment
INCLUDES
|
Pushrod and hardware package
Pre-build and covered wood fuselage, wing and tail sections
Fuel tank
Spinner
Instruction Manual
Aluminum Landing Gear and Fiberglass Cowling and Wheel Pants
Painted pilot
REQUIREMENTS
|
Electric Power-
Brushless Motor: 700-1000 watt 650-800 kV
ESC: Compatible with selected motor
LiPo Battery: 4-6S 3000-4000mAh
Battery Charger: Compatible with selected batery
Glow Power-
Engine: .40-.46 cu in two-stroke, or .53-.65 cu in four-stroke
Fuel, glow starter, propeller, building & field equipment
Radio: 4 channel with 5 standard servos (Glow) or 4 servos for
electric
Y Harness: For aileron servos
Extensions: Two 6" for aileron servos
SPECIFICATIONS
|
Wing Span: 51.5" (1308mm)
Wing Area: 725 sq in (46.7 sq dm)
Length: 48.25" (1226mm)
Flying Weight: 5-5.5 lbs (2268 - 2495)
Wing Loading: 16.0 - 17.6 oz/sq ft (48 - 53 g/sq dm)
Center of Gravity (CG): 3-5/8 - 4-5/8" (92 - 111mm) back for the
leading edge of the wing at the fuselage side
Control Throws Low Rate High Rate
Elevator (up & down): 1" (25.4mm) 1-1/2" (38mm)
Ailerons (up & down): 7/8" (22mm) 1-3/8" (34mm)
Rudder (right & left): 1-5/8" (41mm) 2" (51mm)