Construction: CAD drawn, laser cut balsa and ply with unique self-
latching battery tray that slides in for quick and easy access
Wing: Two-piece bolt on, with aluminum wing joiner
Aileron Control: Dual servo
Landing Gear: One-piece prebent aluminum construction with 2.5"
(63.5mm) diameter main foam wheels, 1" (25.4mm) rubber tail wheel
Covering: High quality premium polyester self adhesive
Motor Mount: Preassembled plywood
Cowl: Fiberglass construction, painted to match color scheme
Wheel Pants: Fiberglass construction, painted to match color scheme

Pre-assembled, pre-covered wood fuselage, wing and tail surfaces
Aluminum landing gear
Main and tail wheels
Fiberglass cowl and wheel pants
Hardware package and instruction manual

Radio: 4-Channel w/four standard servos
6" (152mm) Servo Extensions: Two for ailerons
Y-Harness: One for ailerons
Brushless Motor: 800-1000kV, 500-800W
Electronic Speed Control: 60-75A Brushless
LiPo Battery: 3-4S 3200-5000mAh
Battery Charger: Compatible with selected battery
Propeller, building and field equipment

Wing Span: 60" (1524mm)
Wing Area: 630 sq in (40.6 sq dm)
Length: 43" (1092mm)
Flying Weight: 4.5 - 5 lbs (2041 - 2267 g)
Wing Loading: 16.5 - 18.3 oz/sq ft (50 - 56 g/sq dm)
Airfoil: Semi-symmetrical
Configuration: High wing
Center of Gravity (CG): 2-3/4 - 3-1/2" (70 - 89mm) back from the
leading edge of the wing measured at the fuselage
Control Throws- Low Rates High Rates
Elevator (up & down): 3/4" 40-50% expo 1-1/4" 55-70% expo
Ailerons (up & down): 3/8" 40-50% expo 5/8" 55-70% expo
Rudder (right left): 1-1/4" 25-40% expo 2" 50% expo