Construction: Foam
Wing: Two-piece with carbon rod and side-force generators
Aileron Control: Dual servo
Motor: Brushless outrunner
Electronic Speed Control: 40A
Servos: Four preinstalled (2-aileron, 1-rudder, 1-elevator)
Landing Gear: Main, one-piece prebent wire with 2.5" (63mm) foam
wheels, prebent tail wire with 1" (25.4mm) foamwheel
Propeller: 13x4" plastic, black in color
Spinner: Two 2" (51mm) diameter foam, white in color

RxR 3D Acrobat Airplane with Brushless Motor, ESC, Brushless Motor
four Servos, Propeller, Y-Harness, Spinner and Instruction
Manual

Radio: 4-5 channel with Receiver
Battery: 4S 14.8V LiPo, at least 2200mAh with ST Plug
Battery Charger: Compatible with selected LiPo battery
Charging bag, field equipment

Wingspan: 47.24" (1200mm)
Length: 52.76" (1340mm)
Wing Area: 586sq in (37.8sq dm)
Wing Loading: 14.75oz sq ft (45.0g/sq dm)
Center of Gravity (CG): 5.5" (140mm) back from the leading edge of
the wing measured at the fuselage, CG must not exceed 0.39" (10mm)
either direction