TechOne Hobby Extra 800 3D EPP Foam ARF 31.5"

Your position: Home > Airplane > By Completion Level > Almost Ready-to-Fly

Description

Specifications

This is the Electric Powered, Radio Controlled,
Extra 800 3D Airplane Kit from TechOne Hobby.
For use indoors or outdoors in light to no wind conditions.

FEATURES

Construction: 10mm EPP foam in white with blue, yellow, orange and
black color scheme
Wing: Two-piece
Landing Gear: Wire with 1" (25.4mm) diameter plastic wheels

INCLUDES

All precut Foam to build kit, with Hook and Loop Battery Holder, two
Wheels, Landing Gear, Pushrods, Control Horns and Instruction
Manual

REQUIREMENTS

Radio: 4-channel with micro receiver
LiPo Battery: 7.4V 2S, 400-500mAh
Battery Charger: Compatible with selected battery
Servos: Three 6-8g micro
Electronic Speed Control: 10A NOTE: if using the ESC and battery
listed in the Accessory Completion Guide, the output connector on
the battery will have to be removed and the W.S. Dean's Micro Plug
(WSDM3007) must be soldered to the battery leads to mate with the
battery connector on the ESC
Motor: 1700Kv brushless
Propeller: 8x4 recommended
Field equipment

SPECIFICATIONS

Wingspan: 31.5" (800mm)
Length: 34.5" (876mm)
Weight: 0.4lbs (185-200g)
Center of Gravity (CG): 4.3-4.7" (110-120mm) back from leading edge
of wing measured at the fuselage