Construction: Balsa and ply
Wings: Two-piece balsa and ply
Covering: Top-Flite Monokote
Aileron Control: Dual servo
Cowl: Painted fiberglass with molded exhaust ports and plastic radial
engine detail
Fuel Tank: Approximately 24.5oz (725ml)
Spinner: Aluminum 4" (102mm) diameter
Wheels: 5" (127mm) foam main wheels, 1.5" (38mm) tailwheel,
fiberglass tailwheel cover
Warranty: Top-Flite Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
the date of purchase. This warranty does not cover any component
parts damaged by use or modification.

Prebuilt Wing, Fuselage and Tail Sections, Fuel Tank, Spinner, Decals
Cannons, Antenna Mounts, Cockpit Kit, Main and Tail Wheels, and
and Instruction Manual

Radio: 7-8 ch, 8-ch or more highly recommended for best performance
Servos; Elevators: 2 (min. 50oz-in torque)
Rudder: 1 (min. 50oz-in torque)
Ailerons: 2 (min. 50oz-in torque)
Flaps: 2 (min. 50oz-in torque)
Tail Steering: 1 (min. 50oz-in torque)
Tail Gear Retract: 1 (min. 50oz-in torque)
Throttle: 1 (standard)
Retract: 1 (micro)
Optional Choke: 1 (standard)
Y-Harness: Four 6" for elevator, rudder/steering, alierons and flaps
12" Extension: Two for flaps
24" Extension: Two for ailerons
Heavy Duty Switch Harness: Two
Receiver Battery: 4.8V at least 2400mAh
Retracts: Pneumatic and electric main gear retracts and mechanical
tail gear
Engine: 50 - 55cc gasoline only
Ignition Battery: At least 1600mAh NiMH
Propeller, Building and field equipment

Wingspan: 85" (2160mm)
Wing Area: 1198 sq in (77.3 sq dm)
Weight: 22 - 24 lbs (9980 - 10880 g)
Wing Loading: 42 - 46 oz/sq ft (128 - 140 g/sq dm)
Length: 73.25" (1860mm)
Airfoil: Semi-symmetrical
Center of Gravity: 5-1/2" (139mm) back from the leading edge of the
wing at the fuselage sides
Control Throws High Rate Low Rate
Elevator Up/Down 7/16" (11mm) 11° 5/16" (8mm) 8°
Rudder Right/Left 2" (51mm) 27° 1-1/2" (38mm) 19°
Ailerons Up/Down 7/8" (22mm) 18° 5/8" (16mm) 13°
Flaps 2" (51mm) 35°