Construction: Built-up and sheeted balsa and ply
Wings: One-piece, plywood wing joiner, prehinged flaps for scale
realism
Aileron Control: Dual servo
Cowl: Painted fiberglass
Covering: Top-Flite MonoKote
Canopy: Clear with painted-on frame lines, recessed instrument
detail, molded instrument panel, side panels, floor and seat
Razorback turtle deck and canopy design for scale warbird looks
**pilot shown in photos is NOT included**
Wheels: Foam, Main 5" (127mm), tailwheel 1-3/4" (44mm) diameter
Radial Engine Detail: Molded plastic, black in color (non-functional)
Fuel Tank: 6.3 x 3.1 x 2.4" (160 x 80 x 61mm), rectangular,
approximately 24 oz (720cc)
Propeller Nut: Aluminum with polished finish 1.9" (48mm) diameter at
base
Hatch: Quick release, attaches with magnets, covered in MonoKote
Warranty: Top-Flite Models guarantees this ARF to be free of defects
in material and workmanship at the date of purchase. This warranty
does not cover any component parts damaged by use or modification.

ARF Giant Scale P-47 Razorback Airplane with Canopy, Prop Nut,
Wheels, Molded Radial Engine, Antenna, Fiberglass Cowl and Wheel
Doors, Dummy Antenna, Metal Gun Barrels, Decal Sheet, two Aluminum
Stabilizer Tubes, Instruction Manual

Radio: 6+channel with 11-12 servos (2-elevator, 1-rudder, 2-ailerons,
2-flaps, 1-tail wheel steering, 1-throttle, 1-retract, 1-optional
choke)
6" (152mm) Y-Harness: Four
6" (152mm) Servo Extension: Four
12" (35mm) Servo Extension: Three
24" (610mm) Servo Extension: Three
Heavy Duty Switch Harness: Two
Charge Receptacle: Two

For Gasoline Power;
Engine: 50-61 cc gasoline engine (stock muffler supplied with the
DLE-61 engine fits inside the cowl)
Ignition Battery: 6.6V, at least 1100mAh
For Electric Power;
Motor: 80-85-160kV, outrunner brushless motor
ESC: 160A brushless
Batteries: Two 6S 5000mAh LiPo
Battery Charger: Compatible with selected LiPo batteries, LiPo
charging bag
Receiver Battery: At least 1000mAh
Retracts: Robart pneumatic or electric
For Pneumatic Retracts;
Robart #622 Pneumatic Retractable Main Landing Gear
Robart #160LWC Retractable Tail Gear Assembly
Robart #157VRX Large-Scale Deluxe Air Control Kit
Robart #169 10' Red and Purple Pressure Tubing
Robart #190 Quick Disconnects
For Electric Retracts;
Robart #622P47E Electric Retractable Landing Gear
Robart #160LWCE Electric Retractable Tail Gear Assembly
Robart #177E24S 24" Actuator Extension
Robart #177E12 12" Actuator Extension
Propeller depending on glow or electric power, building and field
field equipment

Wingspan: 85" (2,160mm)
Wing Area: 1329 in² (85.7 dm²)
Wing Loading: 34-37 oz/ft² (104-113 g/dm²)
Length: 75" (1905mm)
Center of Gravity (CG): 6-3/8" (162mm) back from the leading edge of
the wing measured at the fuselage sides
Control Throws High Rate Low Rate
Elevator, up/down: 3/4" (19.1mm) 12° 1/2" (12.7mm) 8°
Rudder, right/left: 1-7/8" (47mm) 22° 1-3/8" (35mm) 16°
Ailerons, up/down: 3/4" (19.1mm) 15° 1/2" (12.7mm) 10°
Flaps, down: 2-3/8" (60mm) 34°