Construction: Balsa and ply
Wing: One-piece
Aileron Control: Dual servo, allows for flaperon mixing and precise
control during aerobatics
Covering: Top-Flite Monokote
Canopy: Clear ABS, pilot figure shown in photos is not included
Landing Gear: Prebent wire with 1.3" (34mm) diameter foam wheels,
steerable nose gear
Spinner: White plastic 1.5" (35.7mm) diameter
Warranty: Top-Flite Models guarantees this kit to be free of defects
in material and workmanship at the date of purchase. This warranty
does not cover any component parts damaged by use or modification.

Prebuilt wing, fuselage and tail sections, landing gear, spinner,
decals and instruction manual

Radio: At least four channels
Servos: Four micro
Y-Harness: One 6" (152mm) for aileron servos
Servo Extensions: Four 6" (152mm)
Motor: .10 size brushless outrunner
Electronic Speed Control: 35A
LiPo Battery: 11.1V (3S) 1800-2200mAh
Battery Charger: For selected LiPo battery
Propeller: 9x6 electric
Building and field equipment

Wingspan: 36" (915mm)
Wing Area: 329 sq in (21.2 sq dm)
Wing Loading: 11.8-13.1 oz/sq ft (36-40 g/sq dm)
Weight: 27-30oz (465-850g)
Length: 34.5" (875mm)
Center of Gravity (CG): 2-5/16" (59mm) back from the leading edge of
the wing at the fuselage side
Control Throws: Low Rate High Rate
Elevator 1/4" (6mm) 7° 3/8" (10mm) 11°
Rudder 3/4" (19mm) 14° 3/4" (19mm) 14°
Ailerons 5/8" (16mm) 25° 3/8" (10mm) 14°